General Engineering


Low Density Polyethylene

Product Description:


PE-LD (Low Density Polyethylene). LDPE is more flexible than HDPE, which makes it a good choice for prosthetic devices, most of which are either drape formed or vacuum formed. Its impact resistance makes it a natural for impact pads, while its easy machinability makes it a good choice for fabricated parts where chemical and corrosion resistance is demanded.

Mechanical properties:

Tensile strength resistance Elongation Rate Resistance Coefficient Notched Impact Strength Bending Strength Bending coefficient Bending coefficient Compressive strength Compressibility Friction coefficient
13.65 548 265.8 O.B. 10.5 245 200 215 0.465

Material properties:

Heat deflection temperature
Heat distortion temperature
Short-term maximum temperature Continuous use temperature Thermal conductivity Coefficients of linear expansion Combustion
45 40 80 65.5 0.36542 11.4442 HB

Properties of Electricity:

Volume resistivity Surface Resistance Dielectric Strength Density Rockwell hardness Shao D hardness Water absorption
>10E15 >10E15 22.82 0.92 -- 60 <0.011

Product Type / Size [mm]

Product Type Size  
Board 1*1.2M*2.4M - 100*1.2M*2.4M 1*1.2M*2.4M - 100*1.2M*2.4M
Stick 8*1M -250*1M