General Engineering

PA6-MOS2

Polyamide, with molybdenum disulfide

Product Description：

Dark Gray

PA 6+MOS2, Grilon, Good UV stability. High surface hardness. The high-crystalline Polyamide ranks as an engineering plastic. PA shows a high thermostability (temperature resistant from -40℃ to approx. +100℃) also high stiffness, hardness and toughness are some of its main characteristics. Due to the fact, that the good mechanical properties will be achieved only after conditioning, this material must conditioned again after an annealing. In addition, this conditioning occurs with a longer storage in air automatically.

Mechanical properties：

Tensile strength resistance Elongation Rate Resistance Coefficient Notched Impact Strength Bending Strength Bending coefficient Bending coefficient Compressive strength Compressibility Friction coefficient

77 23 -- -- -- 2800 -- -- --

Material properties：

Heat deflection temperature
(0.45Mpa) Heat distortion temperature
(1.8Mpa) Short-term maximum temperature Continuous use temperature Thermal conductivity Coefficients of linear expansion Combustion

-- -- 170 100 -- 9.6 HB

Properties of Electricity：

Volume resistivity Surface Resistance Dielectric Strength Density Rockwell hardness Shao D hardness Water absorption

-- -- -- 1.15 -- -- 1.9

Product Type / Size [mm]

Loading....

Product Type Size

Board

Stick