General Engineering
PA6-GF30
Polyamide
Product Description:
Black
PA 6+GF30%, Akulon K, Ultramid B, Glass fiber reinforced polyamide with very high strength. Good UV stability and increased heat resistance. The high-crystalline Polyamide ranks as an engineering plastic. PA shows a high thermostability (temperature resistant from -40℃ to approx. +100℃) also high stiffness, hardness and toughness are some of its main characteristics. Due to the fact, that the good mechanical properties will be achieved only after conditioning, this material must conditioned again after an annealing. In addition, this conditioning occurs with a longer storage in air automatically.
Mechanical properties:
Tensile strength resistance |
Elongation Rate |
Resistance Coefficient |
Notched Impact Strength Bending |
Strength Bending coefficient |
Bending coefficient |
Compressive strength |
Compressibility |
Friction coefficient |
90 |
4 |
-- |
56 |
-- |
4800 |
-- |
-- |
-- |
Material properties:
Heat deflection temperature (0.45Mpa) |
Heat distortion temperature (1.8Mpa) |
Short-term maximum temperature |
Continuous use temperature |
Thermal conductivity |
Coefficients of linear expansion |
Combustion |
222 |
212 |
180 |
100 |
0.26 |
2.7 |
HB |
Properties of Electricity:
Volume resistivity |
Surface Resistance |
Dielectric Strength |
Density |
Rockwell hardness |
Shao D hardness |
Water absorption |
-- |
-- |
15 |
1.35 |
-- |
75 |
1.22 |
Product Type / Size [mm]
Loading.... |
Product Type |
Size |
|
Stick |
|
|