General Engineering
MC-Lube
Polyamide (nylon casting), add solid lubricant
Product Description：
Gray
MC+LUBE, Ultralon, Caprolactam, Nylon 6 Cast Lube Filled, This grade offers the best bearing and wear properties available. Solid lubricant additives, evenly dispersed throughout the nylon material, imparts self-lubricating, high PV, and superior wear characteristics. This Gray colored nylon grade is ideal for larger size parts, bearings, gears, and wear pads.
Mechanical properties：
| Tensile strength resistance |
Elongation Rate |
Resistance Coefficient |
Notched Impact Strength Bending |
Strength Bending coefficient |
Bending coefficient |
Compressive strength |
Compressibility |
Friction coefficient |
| 77 |
19 |
2826 |
25 |
111 |
3276 |
95 |
2759 |
0.19 |
Material properties：
Heat deflection temperature
(0.45Mpa) |
Heat distortion temperature
(1.8Mpa) |
Short-term maximum temperature |
Continuous use temperature |
Thermal conductivity |
Coefficients of linear expansion |
Combustion |
| -- |
95 |
152 |
95 |
-- |
9.8 |
-- |
Properties of Electricity：
| Volume resistivity |
Surface Resistance |
Dielectric Strength |
Density |
Rockwell hardness |
Shao D hardness |
Water absorption |
| -- |
10E13 |
15 |
1.15 |
-- |
85 |
0.74 |
Product Type / Size [mm]
 Loading.... |
| Product Type |
Size |
|
| Board |
|
 |
| Stick |
|
|
