General Engineering

MC-MOS2

Polyamide (nylon casting), molybdenum disulfide added.

Product Description:

Dark Blue

MC+MOS2, Ultralon, Caprolactam, Nylon 6 Cast MD Filled, Finely divided particles of "Moly" (molybdenum disulfide -MoS2) are dispersed evenly throughout the nylon material during polymerization. The Moly particles act as a dry lubricant to enhance nylon's load bearing and wear capabilities while maintaining impact strength and toughness.

Mechanical properties:

Tensile strength resistance Elongation Rate Resistance Coefficient Notched Impact Strength Bending Strength Bending coefficient Bending coefficient Compressive strength Compressibility Friction coefficient
75 18 2416 33 88 2416 -- -- 0.22

Material properties:

Heat deflection temperature
(0.45Mpa)
Heat distortion temperature
(1.8Mpa)
Short-term maximum temperature Continuous use temperature Thermal conductivity Coefficients of linear expansion Combustion
189 92 148 95/-20 -- 7.3 --

Properties of Electricity:

Volume resistivity Surface Resistance Dielectric Strength Density Rockwell hardness Shao D hardness Water absorption
-- 10E14 19.67 1.16 -- 85 1.23

Product Type / Size [mm]
Loading....

Product Type Size  
Board
Stick