General Engineering

POM-H(Delrin)

Delrin Homopolymer

Product Description：

White/Black

POM-H, Delrin 150, POM, Polyxymethylene, the high surface strength is only sur-passed by a few materials. POM shows good sliding properties and high resistance to wear and tear because of the high strength and smooth surface. There is a very low risk of stress crack. POM-H (Homopolymer), High mechanical strength. Very good machinability.

Advantages
★no micro porosity
★high strength
★high rigidity
★high thermal stability
★good electrical insulation properties
★very good sliding properties
★high resistance to solvents
★very high resistance to stress cracks

Disadvantages
☆not resistance to high-concentrated acids
☆difficult to glue and paint

Mechanical properties：

Tensile strength resistance Elongation Rate Resistance Coefficient Notched Impact Strength Bending Strength Bending coefficient Bending coefficient Compressive strength Compressibility Friction coefficient

63 26 2414 82 80 2899 38 3103 0.21

Material properties：

Heat deflection temperature
(0.45Mpa) Heat distortion temperature
(1.8Mpa) Short-term maximum temperature Continuous use temperature Thermal conductivity Coefficients of linear expansion Combustion

170 124 150 86 0.38 12.22 HB

Properties of Electricity：

Volume resistivity Surface Resistance Dielectric Strength Density Rockwell hardness Shao D hardness Water absorption

10E15 10E13 19.70 1.42 -- 86 0.24

Product Type / Size [mm]

Loading....

Product Type Size

Board

Stick

Film(Sheet Metal)